DIY brush guards! Make your own brush guards! Cheap Brush guard tutorial! (Big brushes, tiny brushes and a angled eye liner brush!)

Brush guards are great - after washing your brushes you can really get the water out of them by placing your brushes upside down while keeping the shape intact. They're also great for travel too, so your brushes don't get squished in transit. I'm too cheap to buy brush guards, particularly with the amount of brushes I have, so I DIY them. You can buy the mesh on Ebay for extremely cheap, I think I ordered 1m from China for 99p, so it took a month but hey, it arrived.

I don't think I'm the first to do this - if someone else has done it then by all means go for it. A quickie post on how I did it and that's all from me folks!

You'll need thread, a needle, scissors and the brushes you wanna make guards for. If you only want to use guards for big brushes, then you won't need anything but scissors and you can slide your brushes through straight away.

I've used the mesh on a variety of brush sizes, the DIY will cover how I made a guard for a tiny tiny eco tools eye brush, and a zoeva angled liner brush.

The angled eye liner brush, due to to it's shape, will be cut differently and won't be as tight as other brush guards, further explanation below.

1.  Cut enough mesh to cover the head of the brush.

2. Cut the mesh at an angle, so the largest part will be the part covering the brush head.

3. Get sewing! Doesn't have to be nice or neat, just poke the needles through the mesh holes and bind the mesh together firmly so the mesh doesn't come apart and can take a brush being pushed through.

 4. You end up with a thing that looks like this.

5. Slide the brush into the mesh starting from the bottom of the brush, and there you have it. The angled brush shouldn't be squished up and should be able to be placed upside down for drying without the brush falling through. If it does fall through, it means you need to sew it tighter. Better tighter than looser when sewing these - if it's too tight then you can just stretch the mesh a little.

6. Leftover mesh? 

7. Make a tiny brush guard!

8. See how thin it is in comparison to the brush? (Travel sized tiny brush by the way.)

9. But it fits perfectly cause of the stretchy - ness! With normal brushes you can just make the guards as tight as possible - the angled brush is an exception because it's flat, so you don't want to squish up the sizes and deform the brush! That's why I made the guard flatter and a little bit looser than my other guards. 

10. Ta da! Perfect for putting your brushes in to dry after washing!

Read More

DIY - How to make belt loops for trousers/pants

I recently bought some great tailored shorts from Ebay, but they were  little loose, so instead of making them smaller I added some belt loops. This saves on resewing if my size changes in the future. Here I used some spare velvet ribbon I had lying around, you can use anything you want providing it's washable and can be sewn.

Stuff you need:

• Item of clothing you want to sew
• Pen/chalk - something to mark your clothing with
• Pins
• Material you want to use for the loops
• Thread
• Needles
• Sewing machine (optional, you can hand sew instead)
• Ruler/measuring tape to measure where you want to mark your clothing

How to:

Measure out  on your clothing where you want the loops to go. I didn't have any chalk so I used a whiteboard pen to mark out where I needed the loops to go.

Here, you can see where I've marked out the line, and I did this 5 times - 2 on the front, 3 on the back. The pen is noticeable, but not too bright. You can use any colour that you like, just make sure it comes off in the wash.

 I then cut out 5 strips (one for each line) each 6cm long (you made need longer/shorter) and I folded over each end and hand sewed them. Make sure to start and finish at the back, so the knots don't show.

Here's what they should look like on the front and back.

Now pin each strip onto each line you made, and make sure to adjust when necessary, as the lines are only guidance and may not be 100% accurate. I spent a good few minutes adjusting the placement of each strip.

Use a sewing machine to sew each strip on accurately. (If you don't know how to use a sewing machine there are some great YouTube videos out there or you can just hand sew.)

Final product:

Thanks for reading guys!

Read More